RR Kernel R2 - DEV HOST
RR Kernel R3 - RR-Kernel-R3.zip - 4.00 MB
ARM Project R4+ (Named as R4) - Download
ARM Project R5 - Download
ARMP-v5.00a1.zip - 4.67 MB

Milestone 1 - ARM-Project-M1.zip - 4.67 MB
- Date Achieved : 19-11-2012 -

*R3* 11-11-12
- Used Ondemand as default governor due to new battery life improvements
- Synced Sources with CM
- Set Swappiness to 0
*REASON: As Official CM10 kernel does not even support swapfile, i set this to zero, so as to improve performance a little
- Undervolt WLAN
- Tweaked Ondemand to further reduce power hunger but sustain the performance at the same time
- Re-Added Interactive and InteractiveX and fixed latency Issues

*R3+* 12-11-2012
- Tweaked InteractiveX to reduce latency
- Tweaked Overall voltages for MPUs

*R4* =MILESTONE 1= 20-11-2012
- Shifted Source Code to a new Github for tidyness
- Integrate OPP values into Kernel 3.0.8
- Reduce BL voltages
- Added 1.1GHz Overclock

*R4+* 20-11-2012
- Bump Up all Clock Values to rightfully fit the Clock voltages
- Reduce Some Clock Value Voltages to rightfully balance battery power and speed
- Changes to the Clock Policy for better Clock Rules

*R5* -Never Belittle this small update!- =21-11-2012=
- Further reduce the voltages per clock rate

*v5.00*
- Balance the clock rates and voltage
- Add another 800MHz OPP

*v5.01* =MILESTONE 2= 23-11-2012
¶ INCLUDES ALL ITS ALPHAS AND BETAS ¶
- Change 900MHz to 800 and Undervolted voltage values
- Added a new 900MHz step and tweak voltage to prevent SoDs
- Added 2 New OPP rates and fix voltage correctly
+ 150MHz
+ 200MHz
- Remove Powersave Bias from InteractiveX which causes the extreme lags
- Add OC for 1.2GHz
- Remove 150MHz which resulted in recovery loop kernel panic
- Added All OPPs 100 by 100MHz jumps
- Enable a 1.3GHz OC as 1.2 is not considered Over clock under TI specifications of OMAP 3630
- Over clock GPU to 210MHz from 200
- Remove 200MHz due to Kernel Panics

+NOT DONE+
- Reduce Softkey LED from 5mA to 1mA