Инструкция:
1. Подключаем провод питания. Не вытаскиваем провод, выключаем камеры и вытаскиваем карту памяти.
2. Качаем архив и распаковываем.
3. Распакованную папку "update", копируем в корень флешки (просто кидаем на карту а не в папку какую нибудь).
4. Вставляем карту в регистратор, зажимаем и удерживаем самую крайнюю правую кнопу и включаем большой длинной кнопкой, обе кнопки держим пока не появится надпись об обновлении и отпускаем.
5. Ждем 15-20 секунд, как экран погаснет, включаем регистратор и наслаждаемся новой прошивкой.
Использование SSH:
1. Включаем WiFi на регистраторе.
2. Подключаемся ноутбуком к точке доступа регистратора (например "70mai_d02_106c").
3. Подключаемся "Putty" по адресу 192.168.0.1 на порт 22 (ssh).
логин: root
пароль: <пустой> (просто нажать Enter)
Так же можете использовать программы типа "WinSCP" для редактирования файловой системы.
Использование SSH при помощи FAR:
1. ставим на компьютер файл-менеджер FAR
https://farmanager.com/download.php2. отключаем компьютер от роутера по RJ45 (если подключен)
3. включаем точку доступа на регистраторе (Wi-Fi)
4. подключаемся по вай-фаю к регистратору (должна стоять прошивка с поддержкой SSH)
5. открываем файл-менеджер FAR
6. жмем Alt+F2, выбираем Netbox
7. жмем shift+F4
8. в окошке выбираем: протокол SCP
9. host: 192.168.0.1, порт 22
10. user name: root
11. при запросе пароля просто жмем Enter
12. поднимаемся на уровень выше
получили доступ к регистратору. далее можем копировать, переименовывать, стирать файлы
файлы с озвучкой лежат в папке liteos/voiceplay
ENG:
Instruction:
1. Connect the power cord. Do not pull out the wire, turn off the camera and pull out the memory card.
2. Download the archive and unpack.
3. The unpacked "update" folder, copy to the root of the flash drive (just throw it on the card and not in some folder).
4. Insert the card into the recorder, hold down and hold the rightmost button and turn it on with the long long button, hold both buttons until the message about the update appears and release.
5. We wait 15-20 seconds, as the screen goes blank, turn on the recorder and enjoy the new firmware.
Using SSH:
1. Turn on WiFi on the recorder.
2. Connect the laptop to the registrar's access point (for example, "70mai_d02_106c").
3. Connect "Putty" at the address 192.168.0.1 to port 22 (ssh).
login: root
password: <empty> (just press Enter)
You can also use programs like "WinSCP" to edit the file system.
Using SSH with FAR:
1. put the FAR file manager on the computer
https://farmanager.com/download.php2. disconnect the computer from the router via RJ45 (if connected)
3. turn on the access point on the recorder (Wi-Fi)
4. connect via Wi-Fi to the registrar (there should be firmware with SSH support)
5. open the file manager FAR
6. press Alt + F2, select Netbox
7. press shift + F4
8. select in the window: SCP protocol
9.host: 192.168.0.1, port 22
10. user name: root
11. when prompted for a password, just press Enter
12. go up one level
got access to the registrar. further we can copy, rename, delete files
files with voice acting are in the liteos/voiceplay folder